<aside> ⚠️ While many of the Chevy Bolts share similar features and options, not all cars may have all features. Please contact [email protected] with any questions.
</aside>
<aside> 💲 Please make sure you both plug in and start the charger when you return - the LEDs on the charger must turn from green to blue. Otherwise you may be subject to a fee.
</aside>
<aside> 💲 All items must be removed from the car when you end your trip - including bottles, masks, and any crumbs (please don't eat in the car...). The vehicles are not cleaned between every trip and we rely on the drivers to keep them tidy between professional cleanings. You may be charged a cleaning fee if the vehicle is not returned clean.
</aside>
The Chevy Bolt has automatic temperature control - meaning that the car will increase or decrease the fan speed to bring the car to the set temperature. It also automatically turns on and off the heat or air conditioning.
Just turn the knob to the desired temperature and make sure the "Auto" button is pressed and the small light on the button is on.
If you need extra defrost or the rear defroster, push those buttons and then go back to Auto when the conditions permit.
The headlights automatically go on and off as long as the selector switch is set to "Auto". Please leave it on this setting or switch it to Auto if it's not.
Some cars also have automatic high beams. This is a button on the turn signal stalk to the left of the steering wheel. When the high beam button is pressed down the high beams will automatically come on and turn off when the sensors detect other vehicles on the roadway.
To put the car in Reverse, put your foot on the brake pedal and press the button on the side of the gear selector with your thumb, then move the selector forward and to the left. The red "R" on the selector will be lighted to confirm you are in Reverse.
To put the car in Drive, place your foot on the brake pedal, then pull the selector back until the "D" is lighted.
To put the car in Park, place your foot on the brake pedal and then push the button marked "P".
